Wildfire Mitigation in Bel Air, California
Bel Air sits in Los Angeles County, where Los Angeles Fire Department holds fire jurisdiction. Here is what the hazard mapping actually shows on the ground, and what it puts in force.
What the hazard mapping shows in Bel Air
Of twenty-five points sampled across Bel Air, twenty-one fell inside a mapped Fire Hazard Severity Zone: twenty-one in Very High (LRA). The remaining four sat outside any mapped zone, which does not mean no risk. It means CAL FIRE has not zoned that ground.
| Zone measured | Sample points |
|---|---|
| Very High (LRA) | 21 of 21 |
100% of the mapped points in Bel Air came back Very High, which ranks it 4 of 32 across the areas we sample. Measured against CAL FIRE's Fire Hazard Severity Zone service on 2026-09-26.
What that means for a Bel Air property
Most of Bel Air measured as Very High in a LRA. That is the Local Responsibility Area, where your city or county fire department carries wildfire protection and Government Code 51182 defensible space applies in Very High zones.
Government Code 51182 reaches Local Responsibility Area parcels only where the zone is Very High, which is what the grid measured across Bel Air.
Your parcel, not your city
A city-level answer cannot tell you what you owe. Hazard zone, responsibility area and fire authority are assigned parcel by parcel, and in Bel Air the grid already disagrees with itself across twenty-one sample points. Our Requirements Finder takes an address, reads the actual zone for that parcel from CAL FIRE and the county, and returns the obligations that attach to it, each one cited.
Check a Bel Air address15 further requirements match a parcel of this type and are held back from publication until each has been checked against its published source. We would rather show you nothing than assert a legal requirement we have not verified.